Scaffolding safety net is one of the main equipment for construction safety protection. The setting of safety net should have clear rules and requirements in the construction organization plan, and individual planning should be made for complicated skills.

　　1. When installing the scaffolding safety net, each rope should be tied to the bracket, and the edge of the safety net should be close to the bracket bracket.

　　2. The vertical mesh surface should be perpendicular to the horizontal surface, and the maximum gap between the vertical mesh and the edge of the operation should not exceed 10cm.

　　3. The safety net surface of the building scaffolding should not be pulled too tightly, the distance between the two layers of flat nets should not exceed 10m, and the minimum distance between the flat net and the surface of the object below.

　　4. After the installation of the building safety net is completed, it must be checked by the security inspector before it can be used.

　　5. Usually, the scaffolding safety net in use should be checked irregularly, and the falling objects should be cleaned up in time.

　　The operation layer of the scaffolding safety net must be fully covered with scaffolding, and the distance between the scaffolding and the building structure should not be greater than 150mm. The second layer of the landing frame, the first layer of the cantilever frame (climbing frame), the middle layer shall not exceed 10m and shall not exceed three layers of a hard partition protection, and a horizontal pocket net shall be hung in the middle part of the two layers of hard protection. The net must be hooked up to the building structure.

　　The distance between the inner poles of the scaffolding in the scaffolding safety net is generally not more than 200mm from the body. If it is more than 200mm, a flat and firm standing piece must be laid. When the gap between the scaffolding board and the building on the working layer is more than 150mm, it should be fully enclosed. , to prevent people and materials from falling.